As a “do-it-yourselfer”, there are probably about a hundred mistakes you can make in the process of redecorating your home. Before, you can see the desired results, there would be plenty of materials and money, gone to waste. Here are more home improvement mistakes committed by hundreds of do-it-yourselfers around the world.
Be careful when deciding to renovate one part of your home by having a foolproof plan. You don’t want to get carried away and take everything out, when some parts are still salvageable. You must go for steam cleaning professional’s opinion for the primary cleaning process of walls.
In building a small bathroom
If you want to make the most out of a small bath area, choose the proper fixtures. Toilets and narrower sinks are suggested, choosing otherwise would make the area too small to move around.
Using the wrong paint type
To prevent getting the wrong kind of paint for your DIY project, always have a reference to what type you should use for that particular part of the house. If in doubt as to which you should get, always ask a salesperson to help you out.
- Flat – is a low sheen that is non-reflective in appearance. It is appropriate for low ceilings.
- Flat-enamel – it has a low luster appearance that is perfect for bedrooms and other moderate traffic areas.
- Eggshell – Mostly used in the living room for its soft and velvety finish.
- Satin – satin can be used for high traffic areas like the kitchen. It provides pearl-like appearance on your walls.
- Semi-gloss – it results in radiant walls and perfect to use on cabinets.Not knowing what you are getting yourself into
It is not enough that you have prepared for your DIY project, budget and all. You must also consider having a fall back, if ever the project fails. You must consider possible mistakes.
Disregarding a home inspection
A home inspection is essential when renovating a part of the house. It addresses important safety issues. This is the best time to ask questions and make yourself an informed homeowner.
Purchasing cheap materials
If you buy materials that are not made of fine quality, chances are your DIY project would not look as good as you pictured it would be. Also, they will probably disintegrate quickly, just give it a month or two. Nothing can ever compare with using good quality materials, DIY or not.
Working with the wrong tools
If you are using a tool for an entirely different purpose, chances are the outcome would not be as good. Also, it can be very dangerous.
Ignoring electrical outlets
Before you proceed with your project, always consider your electric wiring first. It might need a few tweaks or might even require you to change it for the sake of safety.
Not knowing limitations
Human strength and capabilities have their own limits. You can’t do everything by yourself, so have somebody around to help you out when there’s a need to.
Not obtaining a permit
However small or big your project is, always obtain a permit. It is important to follow the law regarding these situations, as it can lead to bigger problems if ignored.
So, before you make your DIY projects, make sure you follow all these to prevent backfires, accidents and legal mishaps. After that, you can enjoy the fruits of your labor with satisfaction.
10 Reasons You Should Consider Getting A Robot Vacuum Cleaner
Vacuuming is one of the most hated chores in existence. It is laborious, monotonous, and boring, and in today’s fast-...
The 10 Best Smart Home Products You'll Want to Buy in 2018
The smart home is an increasingly diverse category of products that still has a lot of room for growth. While we are ...
The Most Beautifully Designed Kitchen Sinks of 2017
Never overlook the value of a well designed kitchen sink. As the hub of any kitchen, your sink must be highly funct...
The 10 Best Coffee Makers on Amazon, According to Super Reviewers
We like to think of ourselves as crazy (in the good way) about the stuff we buy, but as much as we’d like to, we can’...